How to Reset Oil Maintenance Light on 2010 Prius? Using 3 Buttons Only!
The 2010 Toyota Prius is one of the most aerodynamic hatchbacks in the world. Its engine is highly efficient and can run for up to 12 months before an oil change. When it is time to change the oil, you have to reset the oil maintenance light after changing the oil.
So, how to reset the oil maintenance light on the 2010 Prius? You can reset the oil maintenance light on the 2010 Toyota Prius by pressing the Trip button and the km/h MPH button together.
I will tell you the whole process in detailed steps and answer relevant questions. Keep reading.
What Does Oil Maintenance Mean and Why Do We Need to Reset It?
The 2010 Toyota Prius is a hybrid electric vehicle with a 1.8-liter four-cylinder engine. This engine requires 4.4 quarts of engine oil. Depending on the oil type and grade, the engine can run for about 10,000 miles. As the oil gets older, it may deteriorate, which impacts the engine performance.
After a certain mileage, you need to change the engine oil as part of the scheduled maintenance. This is when the oil maintenance light comes up on the dashboard. This light indicates your oil health is low, and you have maintenance due soon.
When you change the oil and the oil filter, you need to manually reset the oil maintenance light. Once reset, the system starts counting the service life of the new oil again. It ensures your oil life is monitored properly and you get the oil maintenance light at the right time.
This is why you need to pay attention to the oil maintenance light and take steps to reset it.
How to Reset Oil Maintenance Light on 2010 Prius?
The oil maintenance light reset on the third-generation 2010 Prius Hybrid vehicle is extremely easy. Follow the steps below to reset the oil maintenance light on the 2010 Prius.
Step 1: Turn the Car On
You don’t have to insert any keys. The 2010 Prius comes with smart entry technology, and you have a push button to start the vehicle. The push button is located on the dashboard behind the steering wheel.
Press the push-to-start button twice without touching the brake pedal. It will turn the display on, but the engine will remain off.
Step 2: Select Trip A
There are buttons on both sides of the steering wheel. You will see the “TRIP” button on the right side of the steering. These buttons are arranged in a circular pattern, and the “TRIP” button is at the bottom right part of the circle. Keep pressing this button until you see “TRIP A” highlighted on the display.
Step 3: Turn the Car Off
Turn the vehicle off by pressing the push-to-start button just once.
Step 4: Press and Hold “km/h MPH”
Find the “km/h MPH” button on the dashboard. This is positioned above the push-to-start button. Press and hold this button. The vehicle should still be off at this stage.
Step 5: Press the Push Button
While holding the “km/h MPH” button, press the push-to-start button twice. Don’t press the brake pedal this time, as well. The display will light up, and you will get the “Resetting Oil Maintenance Data” message. A progress bar will show how long it can take for the process to complete.
Step 6: Release the Button
Once the bar is full, you will get the “Complete” message. It indicates the oil maintenance light is reset. You can now release the button and start driving your Prius normally.
Check this video out:
Is the Oil Maintenance Light Reset the Same for All Prius Models?
No. You will see different options in various Prius models. For example, Toyota Prius models from 2016-2022 have different steering control buttons and center consoles than the 2010 Prius. In these vehicles, you have to follow the process below to reset the oil maintenance light.
- Step 1: Push the start button twice without touching the brake pedal. It will turn the display on but keep the engine off.
- Step 2: You have five buttons in the circle on the right side of the steering. Four of these are arrow buttons, and the center button is the OK button. Use the left or right arrow buttons to select the gear icon. Then, press the OK button.
- Step 3: Use the down arrow button to scroll down until you find “Vehicle Settings”. Once this option is highlighted, press the OK button.
- Step 4: On the next screen, select “Maintenance System” and press the OK button again.
- Step 5: Select “Oil Maintenance” on the next screen and press the OK button to reset the oil maintenance light.
- Step 6: There will be Yes and No options on the screen. Use the up arrow to select Yes. Then, press the OK button to confirm.
- Step 7: The oil life will now be reset, and you will get a notification after the process is complete.
FAQs
Here are some questions about the oil maintenance light reset on the 2010 Prius. Check answers to these frequently asked questions.
No. The oil maintenance light just indicates that you have maintenance due. It doesn’t show the oil level.
Yes. 0W-20 is the recommended oil grade for the 2010 Prius. Even if you use any other oil, the maintenance light should be reset after the oil change.
The oil filter in the 2010 Prius may need to be changed before the oil. In that case, you don’t have to reset the oil maintenance light.
Final Words
The 2010 Prius is a highly popular hatchback for its intelligent features. However, the oil maintenance light needs to be reset manually after every oil change. I showed you how to reset the oil maintenance light on the 2010 Prius in simple steps.
It requires the use of only three buttons on the steering wheel and the dashboard. The process takes a few seconds to complete. Once the oil maintenance light is reset, you can drive worry-free for a long time.
